вторник, 16 сентября 2014 г.

DIY Instax Wallpaper

DIY Instax Wallpaper
DIY Instax Wallpaper

I have always wanted a wall in my home that was completely filled with photos! A couple weeks ago I got it stuck in my brain that this wall in our studio was the perfect spot. There were a couple challenges, though: 1. The wall is HUGE. 2. I don't have that many instant photos or film. 3. Even if I did buy enough film to fill the whole wall it would cost thousands of dollars and probably take months (or years?) to take enough photos.


So, I came up with a solution. We "wallpapered" this wall with color copies. The cons: They are not real photos, and they do repeat. The pros: It was done in a couple days, and I can now (slowly) cover the repeats with real photos over the next few years. One more pro: We're in love with it! The photo wall makes our studio room a happier place to work.


Here's how we did it:


How we made our instax photo wall
How we made our instax photo wall

My brother helped me design 11×17 inch images with 9 Instax wide sized photos per sheet. We then created 4 different sheets with different photos. You could always do more if you wanted to reduce repeat photos! We measured the wall and ordered about 130 sheets on 80 lb card stock. We found an inexpensive local printer that did them for around $1 per sheet, so the entire wall only cost about $130! We got the sheets printed and trimmed. Next, we adhered them to the wall. We started with just sturdy double sided tape strips. This didn't work for our wall, so we started using a staple gun. Obviously, someday we will have a lot of staples to pull, but I am ok with that. I plan to keep this wall up for a couple years, so It was worth it to me. If you have satin paint you may not need a staple gun. I made an instagram collage in our last home using only masking tape. It was up for more than 6 months with pretty minimal curling.


So, we adhered and stapled the sheets to the wall. We had to cut some to fill in the leftover space around the edges of the wall at the end. This took an entire afternoon with Katie and Kinsey cutting and stapling. Not bad considering the size of this wall!


Note: We created the wallpaper to match the exact size of Fujifilm INSTAX Wide photos. We chose this instead of polaroid because the film is fairly inexpensive and accessible. It's our favorite instant camera.


Add real photos
Add real photos

Add real photos
Add real photos

Now that it is fully installed I will be covering some of the repeat photos with real Instax photos. I love that I can do this over time and that I don't have to wait until I collect a thousand photos to create the wall! It's so much less pressure.


DIY Instax Wall via A Beautiful Mess
DIY Instax Wall via A Beautiful Mess

Ta-Da! Here's a photo of the finished product! I am super thrilled with the outcome. It has so much personality.


DIY Instax Wall (A Beautiful Mess)
DIY Instax Wall (A Beautiful Mess)

DIY Instax Wallpaper

I hope that this tutorial encourages some of you to try a photo statement wall. I am completely pleased with the quality, the price and the time it took us to install the wallpaper. It was a fun project and something we will enjoy for a long time. Have any of you created a photo wall? Is this something you would try?


XO! Elsie


Original article and pictures take dj4o32igdm3ny.cloudfront.net site

Комментариев нет:

Отправить комментарий